Conductive Level Sensors

These conductive level sensors (CLD4) μ-processor based level controller for liquids with a wide sensitivity range (like sewage water, chemicals, salt water etc. ). The controller has a separate output for alarm indication in case of a tank running dry or if an overflow condition occurs. 8a spdt/spst relay output, no/nc.

Features:

• Conductive level controller.

• Teach-in of sensitivity – operating resistance from.

220ù to 220kù

• Multiple combinations of filling and emptying

Applications

• Low-voltage ac electrodes.

• Easy installation on din rails or with 11 pin circular plug.

• Rated operational voltage:

24 vac/dc, 115 vac or 230 vac.

• Output 2x8a/250 vac spdt relay.

• Led indication for: calibration, faulty operation and relay status.

Conductive level sensors (vt1) for measuring the level of conductive liquids, i. E. Max. /min. Control of charging for discharging. The function is determined by the amplifier relay used. The sensors are delivered with standard length electrodes - these are cut off to suit the application. The teflon housing makes the sensor excellent for use in rough environments.

Features:

• Excellent resistance to chemicals.

• Teflon housing.

• 1 to 4 electrodes.

• Isolated (teflon) or unisolated electrodes.

• Cable connection.

• 1 1/2” Pipe thread according to iso 228/1-gx”

Features:

• VH1 and vh2: hanging electrodes with neoprene cable.

• AA94-10: hanging probe for (swimming) pool level control.

Conductive level sensors (vpc) for measuring the level of conductive liquids, i. E. Max. /min. Control of charging or discharging. The function is determined by the amplifier relay used. The sensors are delivered with standard length electrodes – these are cut off to suit the application.

Features:

• 1 to 4 electrodes

• Isolated or unisolated electrodes

• Cable or screw connection

• 1/2”, 1” or 1 1/2” without pipe thread according to

Iso 228/1-GXXX”