Digital Panel Meters

3-DGT plus dummy zero UP based indicator, double input for ac current or voltage measurements. 112 selectable

Primary ranges. Housing for panel mounting and ip 50 front protection degree (ip65 on request).

 Features:

·       3 DG TLED+ dummy zero, μ-based

·       Digital indicator, for TRMS ac current and voltage.

Measurements

·        Dip-switch-selectable ranges.

·        Front dimensions: 48 x 96 mm.

·        Front protection degree: ip 50 (ip 65 on request).

3-DGTμp-based meter with double input for AC current or voltages. With 20 selectable/vt primary ranges. The housing is for din-rail mounting and ensures a degree of protection (front) of ip 40.

 

Features:

·         3-DGT μp-based for ac currents or voltages.

·         Selectable CT/VT primary range.

·         Din-rail mounting.

·         Degree of protection (front): Ip 40

UP-based digital panel meter, 3 1/2 DGT LED indicator, for current, voltage, temperature and resistance measurements. Measuring ranges and functions easily programmable from the keypad or from the PC by means of optional Udm Soft software. UDM35 includes storage min-max functions and double level protection password. Housing for panel mounting with front protection degree: IP67, NEMA4.

 

Features:

• Multi-input modular instrument 3 1/2 dgt LED
• 0.1% RDG basic accuracy
• TRMS AC current and voltage measurements
• AC/DC current measurements: selectable full scales (200μA to 5A)
• AC/DC voltage measurements: selectable full scales (200mV to 500V)
• °C or °F temperature measurements (Pt100-250-500-1000, Ni100, TC J-K-S-T-E)
• Resistance measurements: selectable full scales (20½ to 20k½)
• Up to 4 independent alarm set-points (optional)
• 20mA/10VDC analog output (optional)
• Serial port RS485 or RS232 (optional)
• MODBUS, JBUS communication protocol

24 x 48 mm hour meters for flush mounting. 10 to 260 V AC or DC input. The front key, which can be locked, allows fast and easy input reset. NPN input to set the time range (Mode) and to enable the device reset.

Features:

• 8-digit LCD display.

• 8 mm digits.

• Reset button with locking function.

• 8 years battery lifetime.

• Electrical or manual reset input

• Setting time mode (through electrical control)

• For front panel mounting.

• 24 x 48 mm housing.

High quality with low cost and 1 year warranty

UP-based digital panel meter, 3 1/2 DGT LED indicator, for current, voltage, temperature and resistance measurements. Measuring ranges and functions easily programmable from the keypad or from the PC by means of optional UDM soft software. UDM35 includes storage min-max functions and double level protection password. Housing for panel mounting with front protection degree: ip67, NEMA4.

Features:

• Multi-input modular instrument 3 1/2 DGT LED

• 0. 1% rdg basic accuracy

• trms ac current and voltage measurements

• ac/dc current measurements: selectable full scales

(200μa to 5a)

• AC/DC voltage measurements: selectable full scales

(200mv to 500v)

• °C or °F temperature measurements

(pt100-250-500-1000, ni100, tc j-k-s-t-e)

• resistance measurements: selectable full scales

(20½ to 20k½)

• Up to 4 independent alarm set-points (optional)

• 20ma/10vdc analog output (optional)

• Serial port rs485 or rs232 (optional)

• Modbus, JBUS communication protocol

High Quality With Low Cost And 1 Year Warranty !

Dimensions: 96x96mm hole size: 91x91mm
Operating voltage: 240V, -40% to +20%
Frequency range: 50Hz ± 5%
Display: LCD display 6-bit semi-
Operating temperature: -10 ??? to 55 ???
Pulse output power: free connection
Pulse duration: 100m sec
Pulse Load: 1 Pulse = 1 kilowatt = 1000wh read directly

 

 

Lose Into Test Volume Was Show	Voltage	Network	Three-phase three-wire. Three-phase four-wire
		Rating	AC100V.200V.380V (when ordering)
		Overload	Duration: 1.2 times the instantaneous: 3 times / 2s
		Power consumption:	<0.5VA (phase)
		Impedance:	> 4K ∩
		Accuracy	PNS measurements. Simple level of 0.5%
	Current	Rating	AC1A.5A (when ordering)
		Overload	Duration: 1.2 times the instantaneous:10 times / 2s
		Power consumption	<0.5VA (phase)
		Impedance	> 20m ∩
		Accuracy	PNS measurement level of 0.5% simple

Digital panel meter is basically a voltage measuring device.  It consists of analog switches, integrator, comparator, control circuitry with display unit.  With the modern technique of production in the field of chemical refineries and fertilizers, it is expected that yearly requirement is high.  The requirement of the country for this item at present is being met through imports.  It has a very good export market.  Raw materials required for the production of Digital Panel Meters are Hole Printed circuit boards, chips, electrolytic capacitors, poly carbonate capacitors, metal film resistors, leakage & switching transistors, zenor diodes, transformers etc.