Photoelectric Sensors

The PA18CSD.. is a family of inexpensive general purpose Diffuse-reflective sensors in Industrial standard 18 mm cylindrical PBTP housing. They are useful for simple applications where a basic sensor provides adequate sensing performance. The sensors are simple to use and no adjustment are necessary (Except 400 mm diffuse adjustable type). The output is a 4-wire complementary (NO and NC) output in NPN (current sinking) or PNP (current souring).

Features:

• Range: 400 mm adjustable.
• 100, 200 or 400 mm fixed.
• Modulated, infrared light.
• Supply voltage: 10 to 40 VDC.
• Output: 200 MA NPN or PNP.
• Make and break switching function, LED indication.
• Protection: Reverse polarity, short-circuit, transients.
• High immunity to ambient light.
• Cable and plug versions.

The PD70 sensor family of photoelectric sensors is specially designed for Doors and Entrance control to meet the requirements in the door market. The slim housing design fits inside the aluminum frame of e.g. sliding Doors. The emitter has a test input to turn it off for evaluation of the sensor function. Available in 10-30 VDC Version.

Features:

• Doors and Entrance control.
• Range 12 m
• Modulated, infrared light.
• Supply voltage: 10 to 30 VDC.
• Output: 100 MA, NPN or PNP type.
• Make or break switching.
• LED for output indication or power supply.
• Protection: reverse polarity, short circuit, transients.
• Cable versions or M8 connector.
• Emitter mute.
• CE and UL325 approved.

U-Processor controlled amplifier for one set of photoelectric sensors, type Moftr. Utilizing an 11-pin circular plug for easy connection. 8 A SPDT relay output, NPN / PNP transistor output or alarm output. Diagnostics For sensor test during operation. Alignments help via LED or alternation of alarm output. Level indication for dirt Accumulation. Manual or automatic emitter power regulation. Two emitter codes available for high neighbor immunity.

Features:

• U-Processor controlled.
• Amplifier relay for photoelectric switches.
• Automatic or manual emitter power regulation.
• Self-diagnostic functions.
• Alignment help.
• Timer option, S142B.
• Rated operational voltage:
• 24 VAC/DC, 24 VAC, 115 VAC or 230 VAC.
• Output 8 A/250 VAC SPDT relay and 100 mA NPN.
• LED indication: Automatic gain, output, level, emitter or receiver fault.

The pa18cad10 Is part of a family of inexpensive general purpose diffuse reflective sensors in industrial standard 18 mm cylindrical abs housing. The sensors are useful in applications where high accuracy detection as well as small size is required. Compact housing and high power led for excellent performance-size ratio. The potentiometer used for adjustment of the sensitivity makes the sensors highly flexible. The output type is NPN or PNP and the output switching function is no and nc.

Features:

• Miniature sensor range
• Range: 1 m (axial), 0. 8 m (radial)
• Sensitivity adjustment by potentiometer
• Modulated, red light 625 NM
  
• Supply voltage: 10 to 30 VDC
  
• Output: 100 ma, NPN or PNP, no & NC
  
• Degree of protection ip67, ip69k.
• Led indication for output, stability and power on.
• Protection: reverse polarity, short circuit and transients.
• Cable and plug versions.
• Excellent EMC performance.

The pd30cnr06 sensor family comes in a compact10 x 30 x 20 mm reinforced PMMA/abs housing. The sensors are useful in applications where high accuracy detection as well as small size is required. Compact housing and high-power led for excellent performance-size ratio. The teach-in function for adjustment of the sensitivity makes the sensors highly flexible. The output type is preset (NPN or PNP), and the output switching function is one programmable (no or NC) and one dust output no or NC.

Features:

• Miniature sensor range.
• Range: 6 m, with reflector.
• Sensitivity adjustment by teach-in programming.
• Modulated, infrared light 880 NM.
• Supply voltage: 10 to 30 VDC.
• Output: 100 ma, NPN or PNP preset.
• Make and break switching function programmable.
• Led indication for output, stability and power on.
• Protection: reverse polarity, short circuit and transients.
• Cable and plug versions.
• Excellent EMC performance.
• Dust alarm output.

The PE12CNT. is a family of general purpose Photoelectric Sensors. They are specially designed for Elevators, Escalators, Entrance control to meet the requirements in the door market. The “snap-on “housing can be mounted with a wall thickness from0.6 mm to 2.25 mm. The emitter has a mute input to turn it off for evaluation of Available in 10-30 VDC versions.

Features:

• Elevators, Escalators and Entrance control.
• Range 15 m
• Modulated, infrared light.
• Supply voltage: 10 to 30 VDC
• Output: 100 MA, NPN or PNP type.
• Make or break switching.
• LED for output indication or power supply.
• Protection: reverse polarity, short circuit, transients.
• Cable versions with or without connector.
• Emitter mute and power adjustment.
• CE, UL325 and UL508 approved.

1)     The Guardian 1 is an overhead sensor for pedestrian sliding doors. The sensor has combined motion and presence (safe) detection zones. The sensor is based on CMOS camera technology and detection on image processing. The motion zone reacts only on movement whereas the presence zone reacts on both movement and presence. The motion zone can be blanked in 3 directions (front, left and right) in order to avoid detection of unwanted objects. The presence zone is taught into the sensor by recognition of some standard test

Targets in the setup phase. The presence zone also adapts to the surroundings to work in different weather conditions. The sensor has separate outputs for the motion and presence zones as well as a test input to test the sensor function for each door cycle.

FEATURES:

• Overhead sensor for sliding doors

• Motion and presence detection in one unit

• Digital Video Camera Technology

• Easy teach of presence zone

• Environmental adaptation

• No Crosstalk between sensors

• Separate motion and presence output

• 2 x SPST relay outputs

• Supply voltage: 12 to 24 VAC/DC

• LED indication for: Power, Motion and Presence

• CE, UL325 and TÜV approved