Temperature Controller

MT48R PID+Fuzzy Temperature Controller:
Description 48x48x100
Model:MT48-R
Specification & Characteristic:Data
Power supply:90 ~ 265 VAC 50/60 HZ
Power consumption:5VA max.
Sensor input:K / J / PT-100Ω selectable
Control output Relay:3A / 250 VAC SPDT
Control output Voltage:12V / 50mA
Control output Linear:4~20 mA ; Load: 600Ωmax.
Alarm output:3A / 250 VAC SPDT
Control method:Fuzzy ???PID or ON / OFF settable
Operating circumstance:-20°C ~ +75°C ; 25% ~ 85% RH
Display accuracy:±0.1% of FS + 1 digit
Cycle time:0 ~ 99 sec
Proportional band (P):0 ~ 999
Integral time (I):0 ~ 3999
Derivative time (D):0 ~ 3999
Alarm range:-99 ~ 999
PV sampling time:0.1 sec
Input shift:-99 ~ +99
AT bias (TU):0 ~ 999
Memory method:EEPROM
Insulation resistance:Over 50MΩ / 500VDC
Dielectric strength:Over 2.5kV / 1 minute
EMC standard:
ESD: 8 KV Air Discharge (Level 3) / EN-61000-4-2
RF Interference: 10V/ M / ENV50140
Burst test: 2KV / EN61000-4-4

MT 96r pid+FUZZY temperature controller:
Description 96x96x80
Model:mt96-r
Specification & characteristic:data
Power supply:90 ~ 265 vac 50/60 HZ
Power consumption:5va max.
Sensor input:k / j / pt-100ω selectable
Control output relay:3a / 250 vac sp dt
Control output voltage:12v / 50ma
Control output linear:4~20 ma ; load: 600ωmax.
Alarm output:3a / 250 vac sp dt
Control method:fuzzy  Pid or on / off settable
Operating circumstance:-20°c ~ +75°c ; 25% ~ 85% rh
Display accuracy:±0. 1% of fs + 1 digit
Cycle time:0 ~ 99 sec
Proportional band (p):0 ~ 999
Integral time (i):0 ~ 3999
Derivative time (d):0 ~ 3999
Alarm range:-99 ~ 999
PV sampling time:0. 1 sec
Input shift:-99 ~ +99
At bias (TU):0 ~ 999
Memory method:EEProm
Insulation resistance:over 50mω / 500vdc
Dielectric strength:over 2. 5kv / 1 minute
EMC standard:
ESD: 8 kv air discharge (level 3) / en-61000-4-2
RF interference: 10v/ m / env50140
Burst test: 2kv / en61000-4-4

We supply CD/CH Series intelligent temperature controller is a kind of multi-functional adjustable instruments with special with special microprocessor. It has exquisite appearance and reliable performance, It adopts switching power supply and surface mounting technologies (SMT), the specify self-diagnosing function, auto-tuning function and intelligent control function.

 

Main Technical Parameter:

Input of diversify Form
Thermocouple (TC), Thermal Resistance (RTD),
Standard Current and voltage signal (Table B)

Jyins
Measurement Precision: ±0-5%FS
Comparison error of the junction: ±2°C (the software modification between 0~50°C can be done)
Resolution: 14 Bit
Sampling Time: 0.5 Sec

Displaying
Process value (PV), Setting Value (SV):-1999-+9999
Output alarm auto-turning state display: LED

Control Modes
1. PID control (including ON/OFF, potential PID and successive PID)
2. Auto-turning control

Control Output
1. Current Output: DC0-10mA, 4-20mA (RL<500???)
2. Voltage Output: DC0-5V, 1-5V (RL>10K)
3. Relay Output: contact capacity 250VAC3A (dissipative load)
4. Voltage pulse output: 0-12V (it is suitable for solid state relay)
5. Controllable SCR Output: Zero cross trigger or phase-shift trigger (dissipative load)
6. Alarm function output: it can output maximum two sets with 12 modes contact capacity
Output: 250VAC 3A (dissipative load)

Setting Range:
Setting value (SV): Proportional process value (PV)
Proportional Band: 0-full scale (when setting o, the on/off control)
Integral Time: 0-3600sec (set o as the derivative off)
Derivative Time: 0-3600sec, (set o as the derivative off)
Proportional cycle: 1-100 sec.
Sluggish width of bit control output: 1-100°C (or other PV units)

Others
1. Insulation Resistance :> 50M??? (500VDC)2. Insulation Intensity: 1500VAC/minute
3. Power Consumption :< 10VAC
4.Using condition: 0-50°C, 30-85%RH no erosive location
5. Weight: 0-25kg (C809)